Time and a Half Calculator
Find your 1.5x overtime rate, overtime pay and total weekly pay in seconds. Free, no signup.
Calculate your overtime pay
Enter your hourly wage and the hours you worked. This overtime pay calculator works out your overtime rate, your regular pay, your overtime pay and your total weekly pay, and it shows each step of the working.
Your regular hourly pay, before overtime.
Hours paid at your regular rate. The standard is 40 hours in a workweek.
Hours worked past the 40 hour threshold, or past 8 hours in a day in California.
1.5 for time and a half, 2.0 for double time. Use the buttons above, or type a value.
Step by step
Note: This calculator shows gross pay before taxes and other deductions. It does not save your entries. Your numbers stay in your browser.
What Is Time and a Half?
Time and a half is a pay rate equal to 1.5 times your regular hourly rate. It is the rate the Fair Labor Standards Act, known as the FLSA, requires for overtime worked by covered, non-exempt employees. If your regular rate is $20 an hour, your time and a half rate is $30 an hour. Every overtime hour then pays $30 instead of $20. The extra $10 is the overtime premium. It is the part of overtime pay that rewards the extra hours beyond the standard workweek.
The rule comes from federal law, and it applies across the United States. The U.S. Department of Labor, through its Wage and Hour Division, enforces the FLSA. Under Fact Sheet 23, covered non-exempt employees must receive overtime pay for hours worked over 40 in a workweek at a rate not less than one and one-half times their regular rate of pay. The FLSA does not require overtime for work on Saturdays, Sundays, or holidays as such. Overtime is based on hours worked, not on the day of the week.
Many people first meet time and a half on a paycheck that looks higher than usual after a long week. This overtime pay calculator removes the guesswork. Enter the numbers and it shows the rate, the pay for each part of the week, and the total, with each step shown.
Time and a Half Formula
The time and a half formula has four parts. Use them in order.
Overtime rate = hourly rate x 1.5
Regular pay = hourly rate x regular hours
Overtime pay = overtime rate x overtime hours
Total weekly pay = regular pay + overtime pay
The overtime premium is the extra pay that the 1.5x rate adds. Work it out as overtime hours x hourly rate x 0.5. The effective hourly rate is total weekly pay divided by total hours worked. It shows what the whole week was worth per hour on average.
The regular rate of pay matters here. Under the FLSA, the regular rate includes all remuneration for employment, except for certain payments the FLSA excludes. The Department of Labor explains what counts toward the regular rate in Fact Sheet 56A. If you work at two or more rates in the same week, the regular rate is the weighted average of those rates. For most people with one hourly rate, the calculation is simple: multiply the rate by 1.5.
How to Use This Time and a Half Calculator
- Enter your hourly wage. This is your regular rate of pay, before overtime.
- Enter your regular hours and your overtime hours. Regular hours default to 40, the standard 40 hour workweek. Overtime hours are the hours above that threshold.
- Choose the multiplier. The calculator defaults to 1.5x for time and a half. Choose 2.0x to see double time pay instead, or type a different multiplier between 1 and 3. Press Calculate and read the breakdown.
The calculator shows your overtime rate at the top, then your regular pay, overtime pay, total weekly pay, overtime premium, and effective hourly rate below. The step by step working appears under the results, so you can check every number. Change any value and the result updates at once. The calculator runs in your browser and does not save your entries. A weekly overtime calculator like this one is useful for checking a pay stub, planning a long week, or comparing a job offer that involves regular overtime.
Worked Example: $20 an Hour, 10 Hours of Overtime
Use the worked example below to check the time and a half formula. A worker earns $20 an hour, works 40 regular hours, and works 10 hours of overtime in the same workweek.
Overtime rate = $20 x 1.5 = $30 per hour
Regular pay = 40 x $20 = $800
Overtime pay = 10 x $30 = $300
Total weekly pay = $800 + $300 = $1,100
Overtime premium = 10 x $20 x 0.5 = $100
Effective hourly rate = $1,100 / 50 hours = $22 per hour
The overtime premium is $100. That is the extra pay the worker earned because the 10 overtime hours were paid at $30 instead of $20. Without the overtime premium, the same 50 hours would have paid $1,000. The effective hourly rate of $22 shows what the whole week was worth per hour on average. Use the same steps with your own numbers, or enter $20, 40, and 10 in the calculator above and check that you get the same $1,100 total.
Common Time and a Half Rates
Use the table to check the overtime rate for common hourly wages. The table also shows the double time rate and the pay for 10 overtime hours at the time and a half rate, so you can compare the two at a glance.
| Hourly rate | Time and a half rate (1.5x) | Double time rate (2.0x) | Pay for 10 overtime hours at 1.5x |
|---|---|---|---|
| $15.00 | $22.50 | $30.00 | $225.00 |
| $18.00 | $27.00 | $36.00 | $270.00 |
| $20.00 | $30.00 | $40.00 | $300.00 |
| $25.00 | $37.50 | $50.00 | $375.00 |
| $30.00 | $45.00 | $60.00 | $450.00 |
At $15 an hour, time and a half is $22.50 an hour. Ten overtime hours at that rate pay $225. At $30 an hour, time and a half is $45 an hour, and ten overtime hours pay $450. Double time is exactly twice the regular rate in every row. These are gross amounts, before tax and other deductions. If your wage is not in the table, use the overtime rate calculator above and enter your own rate.
Who Gets Time and a Half?
Time and a half is not paid to every worker. Under the FLSA, it is owed to covered, non-exempt employees. A non-exempt employee is one who is covered by the FLSA overtime rules. An exempt employee is not covered, and is not owed overtime under federal law. Exempt status depends on the job duties and the pay basis, not on the job title alone. Your employer cannot make a job exempt simply by calling it a manager role.
Pay level is part of the test for the executive, administrative, and professional exemptions. An employee generally must be paid at least $684 per week, which is $35,568 per year, to meet the salary level for those exemptions. That figure comes from the 2019 rule, which remains in effect after the 2024 rule was vacated by a Texas federal court in November 2024. Workers below that level, and workers who do not meet the duties test, are non-exempt.
The workweek is a fixed and regularly recurring period of 168 hours, or seven consecutive 24-hour periods. It can start on any day, but once set, an employer may change it only if the change is intended to be permanent and is not designed to avoid overtime. Hours cannot be averaged over two or more weeks to avoid paying overtime. A workweek of 50 hours followed by a workweek of 30 hours is 10 overtime hours in the first week, even though the two-week average is 40 hours. The FLSA sets no limit on the number of hours employees aged 16 or older may work in a workweek.
Time and a Half vs Double Time
Time and a half pays 1.5 times your regular rate, and double time pays 2 times your regular rate. The difference is the premium. The extra pay beyond the regular rate is 50 percent of the rate for time and a half, and 100 percent for double time.
| Rate type | Multiplier | Rate at $20 an hour | Pay for 10 hours |
|---|---|---|---|
| Time and a half | 1.5x | $30.00 | $300.00 |
| Double time | 2.0x | $40.00 | $400.00 |
Federal law requires time and a half for overtime. It does not require double time. Double time comes from state law, an employer policy, a union contract, or a collective bargaining agreement. Some employers pay it for holidays or for very long shifts. Others never pay it. If your contract or your state law promises double time, check the exact trigger, because it varies. Use the 2.0x preset in the double time calculator above to see what double time would pay for your hours.
California Rules
California has its own overtime rules, and they are stricter than the federal rules. In California, non-exempt employees earn time and a half after 8 hours in a single workday, after 40 hours in a workweek, and for the first 8 hours on the seventh consecutive day of work in a workweek. They earn double time after 12 hours in a single workday, and after 8 hours on the seventh consecutive day of work.
The daily rule matters for workers with long shifts but a short week. A California worker who works four 10 hour days, that is 40 hours in total, still earns two hours of time and a half each day for the hours past eight. Under federal law alone, that same week would have no overtime at all, because the total is only 40 hours. California rules apply to non-exempt employees working in California. Other states have their own rules, and some have none beyond the federal standard. If you work in California, check the daily rule first. Your employer payroll policy and any union contract may add more.
Overtime Pay and Your Paycheck
Overtime pay is part of your gross weekly pay. It is added to your regular pay before taxes and other deductions are taken out. It is taxed like regular wages. There is no separate federal income tax rate for overtime. Your take-home pay depends on your withholding, your tax bracket, and your deductions, such as health insurance and retirement contributions. That is why the calculator on this page shows gross pay.
A week with overtime raises your gross pay, and the extra pay can move part of your income into a higher marginal bracket. Only the income above each bracket threshold is taxed at the higher rate. Your employer takes taxes from the total, not from the overtime alone. Check your pay stub to see the split between regular and overtime hours, and check the rate shown for the overtime lines. If the numbers do not match the 1.5x formula, ask your employer or your payroll department, and keep a record of the hours you worked.
Source: U.S. Department of Labor, Wage and Hour Division, Fact Sheet 23: Overtime Pay Requirements of the FLSA. The Department of Labor is the source of truth for federal overtime rules. Fact Sheet 56A gives the detail on the regular rate of pay.
Disclaimer: This calculator and the article on this page provide general information only. They are not legal, tax, or payroll advice. Overtime rules vary by state, employer policy, and union contract. Verify your pay with your employer or the U.S. Department of Labor.
Frequently Asked Questions
Quick answers about time and a half and overtime pay.
What is time and a half?
Time and a half means you are paid 1.5 times your regular hourly rate for qualifying overtime hours.
What is time and a half for $20 an hour?
$30 per hour. 10 overtime hours at that rate pay $300, and a 40 hour week plus 10 overtime hours totals $1,100.
How do you calculate time and a half?
Multiply your hourly rate by 1.5 to get the overtime rate, then multiply the overtime rate by your overtime hours.
Does overtime start after 40 hours or after 8 hours a day?
Under federal law it starts after 40 hours in a single workweek. California also requires it after 8 hours in a day.
What is the difference between double time and time and a half?
Time and a half pays 1.5 times your rate and is required by federal law for overtime. Double time pays 2 times your rate and is not required federally; it comes from state law, employer policy, or union contracts.
Try our other calculators
If you need to count the days to a pay date, use our time between dates calculator. For workdays only, the business days calculator counts weekdays. For the site main tool, try the age calculator.